View STP16CPC05_9087869.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. june 2014 docid15352 rev 4 1/30 STP16CPC05 low voltage 16-bit constant current led sink driver with balanced output rise/fall time datasheet - production data features ? low voltage power supply down to 3 v ? 16 constant current output channels ? adjustable output current through external resistor ? serial data in/parallel data out ? can be driven by a 3.3 v microcontroller ? output current: 5-100 ma ? max clock frequency 30 mhz ? esd protection 2.5 kv hbm, 200 v mm description the STP16CPC05 is a monolithic, low voltage, low current power 16-bit shift register designed for led panel displays. the STP16CPC05 contains a 16-bit serial-in, parallel-out shift register that feeds a 16-bit, d-type storage register. in the output stage, sixteen regulated current sources provide from 5 ma to 100 ma constant current to drive the leds. the STP16CPC05`s output stage is designed to optimize the turn-on and turn-off time, typically 100 ns. the balanced turning on/off improves the system performances reducing the bypass capacitance in applications where parasitic inductance generate ringing or noise in the system. the leds' brightness can be controlled by using an external resistor to adjust the STP16CPC05 output current. the STP16CPC05 guarantees a 20 v output driving capability, allowing users to connect more leds in series.the high clock frequency, 30 mhz, makes the device suitable for high data rate transmission. the 3.3 v voltage supply is useful in applications that interface with a 3.3 v microcontroller so-24 tssop24 tssop24 (exposed pad) qsop-24 table 1. device summary order codes package packaging STP16CPC05mtr so-24 1000 parts per reel STP16CPC05ttr tssop24 2500 parts per reel STP16CPC05xttr tssop24 exposed pad 2500 parts per reel STP16CPC05ptr qsop-24 2500 parts per reel www.st.com
contents STP16CPC05 2/30 docid15352 rev 4 contents 1 summary description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 pin connection and description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.3 recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 equivalent circuit and outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 timing diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6 typical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 7 test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 8 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9 packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 10 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
docid15352 rev 4 3/30 STP16CPC05 summary description 30 1 summary description 1.1 pin connection and description figure 1. pin connection note: exposed-pad should be electrically connected to a metal land electrically isolated or connected to ground table 2. typical current accuracy output voltage current accuracy output current v dd temperature between bits between ics 1.3 v 1.5% 5% 20 to 100 ma 3.3 v to 5 v 25 c table 3. pin description pin n symbol name and function 1 gnd ground terminal 2 sdi serial data input terminal 3 clk clock input terminal 4 le latch input terminal 5-20 out 0-15 output terminal 21 oe input terminal of output enable (active low) 22 sdo serial data out terminal
summary description STP16CPC05 4/30 docid15352 rev 4 23 r-ext input terminal of an external resistor for constant current programing 24 v dd supply voltage terminal table 3. pin description (continued) pin n symbol name and function
docid15352 rev 4 5/30 STP16CPC05 electrical ratings 30 2 electrical ratings 2.1 absolute maximum ratings stressing the device above the rating listed in the ?absolute maximum ratings? table may cause permanent damage to the device. these are stress ratings only and operation of the device at these or any other conditions above those indicated in the operating sections of this specification is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2.2 thermal data table 4. absolute maximum ratings symbol parameter value unit v dd supply voltage 0 to 7 v v o output voltage -0.5 to 20 v i o output current 100 ma v i input voltage -0.4 to v dd +0.4 v i gnd gnd terminal current 1600 ma f clk clock frequency 50 mhz table 5. thermal data symbol parameter value unit t opr operating temperature range -40 to +125 c t stg storage temperature range -55 to +150 c r thjc thermal resistance junction-case so-24 60 c/w tssop24 85 c/w tssop24 (1) exposed pad 1. the exposed pad should be soldered directly to the pcb to realize the thermal benefits. 37.5 c/w qsop-24 72 c/w
electrical ratings STP16CPC05 6/30 docid15352 rev 4 2.3 recommended operating conditions table 6. recommended operating conditions t a = 25 c symbol parameter test conditions min typ max unit v dd supply voltage 3.0 - 5.5 v v o output voltage - 20 v i o output current outn 3 - 100 ma i oh output current serial-out - +1 ma i ol output current serial-out - -1 ma v ih input voltage 0.7v dd -v dd +0.3 v v il input voltage -0.3 - 0.3v dd v t wlat le pulse width v dd = 3.3 v to 5.0 v 20 - ns t wclk clk pulse width 16 - ns t wen oe pulse width 200 - ns t setup(d) setup time for data 8 - ns t hold(d) hold time for data 4 - ns t setup(l) setup time for latch 5 - ns f clk clock frequency cascade operation (1) v dd = 5 v 1. if the device is connected in cascade, it may not be possible achieve the maximum data transfer. please considered the timings carefully. -30mhz
docid15352 rev 4 7/30 STP16CPC05 electrical characteristics 30 3 electrical characteristics v dd = 3.3 v to 5 v, t a = 25 c, unless otherwise specified table 7. electrical characteristics symbol parameter test conditions min typ max unit v ih input voltage high level 0.7v dd v dd v v il input voltage low level gnd 0.3v dd v i oh output leakage current v oh = 20 v 10 a v ol output voltage (serial-out) i ol = 1 ma 0.4 v v oh output voltage (serial-out) i oh = -1 ma v dd -0.4v v i ol1 output current v o = 0.3 v, r ext = 4.2 k 4.25 5 5.75 ma i ol2 v o = 0.3 v, r ext = 1 k 19 20 21 i ol3 v o = 1.3 v, r ext = 200 96 100 104 i ol1 output current error between bit (all output on) v o = 0.3 v, r ext = 4.2 k 5 8 % i ol2 v o = 0.3 v, r ext = 1 k 1.5 3 i ol3 v o = 1.3 v, r ext = 200 1.2 3 r sin(up) pull-up resistor 150 300 600 k r sin(down) pull-down resistor 100 200 400 k i dd(off1) supply current (off) r ext = 1 k out 0 to 15 = off 4 ma i dd(off2) r ext = 250 out 0 to 15 = off 11.2 i dd(on1) supply current (on) r ext = 1 k out 0 to 15 = on 4.5 i dd(on2) r ext = 250 out 0 to 15 = on 11.7 thermal thermal protection 170 c
electrical characteristics STP16CPC05 8/30 docid15352 rev 4 v dd = 5 v, t a = 25 c, unless otherwise specified table 8. switching characteristics symbol parameter test conditions min typ max unit t plh1 propagation delay time, clk-outn , le = h, oe = l v ih = v dd v il = gnd c l = 10 pf i o = 20 ma v l = 3.0 v r ext = 1 k r l = 60 v dd = 3.3 v - 175 227 ns v dd = 5 v - 159 206 t plh2 propagation delay time, le-outn , oe = l v dd = 3.3 v - 176 228 ns v dd = 5 v - 158 205 t plh3 propagation delay time, oe -outn , le = h v dd = 3.3 v - 235 305 ns v dd = 5 v - 192 250 t plh propagation delay time, clk-sdo v dd = 3.3 v - 20 26 ns v dd = 5 v - 14 18 t phl1 propagation delay time, clk-outn , le = h, oe = l v dd = 3.3 v - 70 91 ns v dd = 5 v - 68 88 t phl2 propagation delay time, le-outn , oe = l v dd = 3.3 v - 56 73 ns v dd = 5 v - 54 70 t phl3 propagation delay time, oe -outn , le = h v dd = 3.3 v - 102 132 ns v dd = 5 v - 100 130 t phl propagation delay time, clk-sdo v dd = 3.3 v - 25 32 ns v dd = 5 v - 17 22 t on output rise time 10~90% of voltage waveform v dd = 3.3 v - 116 150 ns v dd = 5 v - 108 140 t off output fall time 90~10% of voltage waveform v dd = 3.3 v - 80 104 ns v dd = 5 v - 80 104 t r clk rise time (1) - 5000 ns t f clk fall time (1) - 5000 ns 1. in order to achieve high cascade data trans fer, please consider tr/tf timings carefully.
docid15352 rev 4 9/30 STP16CPC05 equivalent circuit and outputs 30 4 equivalent circuit and outputs figure 2. oe terminal figure 3. le terminal figure 4. clk, sdi terminal
equivalent circuit and outputs STP16CPC05 10/30 docid15352 rev 4 figure 5. sdo terminal figure 6. block diagram
docid15352 rev 4 11/30 STP16CPC05 timing diagrams 30 5 timing diagrams note: outn = on when dn = h outn = off when dn = l figure 7. timing diagram note: the latches circuit holds data when the le terminal is low. 1 when le terminal is at high level, latch circuit does not hold the data it passes from the input to the output. 2 when oe terminal is at low level, output terminals out0 to out15 respond to the data, either on or off. 3 when oe terminal is at high level, it switches off all the data on the output terminal. table 9. truth table clock le oe serial-in out0 ............. out7 ................ out15 sdo h l dn dn ..... dn - 7 ..... dn -15 dn - 15 l l dn + 1 no change dn - 14 h l dn + 2 dn + 2 ..... dn - 5 ..... dn -13 dn - 13 x l dn + 3 dn + 2 ..... dn - 5 ..... dn -13 dn - 13 x h dn + 3 off dn - 13
timing diagrams STP16CPC05 12/30 docid15352 rev 4 figure 8. clock, serial-in, serial-out
docid15352 rev 4 13/30 STP16CPC05 timing diagrams 30 figure 9. clock, serial-in, latch, enable, outputs figure 10. outputs
typical characteristics STP16CPC05 14/30 docid15352 rev 4 6 typical characteristics figure 11. output current-r ext resistor table 10. output current-r ext resistor rext ( ) output current (ma) 7370 3 4270 5 2056 10 1006 20 382 50 251 80 200 100
docid15352 rev 4 15/30 STP16CPC05 typical characteristics 30 figure 12. output current vs i ol (%) t a = 25 c figure 13. i set vs drop out voltage (v drop ) t a = 25 c iout (ma) avg @3.3 v avg @5.0 v 320 22 537 40 10 79 79 20 160 158 50 422 415 80 700 690 100 880 870
typical characteristics STP16CPC05 16/30 docid15352 rev 4 figure 14. i dd on/off, t a = 25 c
docid15352 rev 4 17/30 STP16CPC05 test circuit 30 7 test circuit figure 15. dc characteristic figure 16. ac characteristic
test circuit STP16CPC05 18/30 docid15352 rev 4 figure 17. typical application schematic note: v l will be determined by the v f of the leds test condition: temp. = 25 c, v dd = 3.3 v, c l = 10 pf, freq. = 1 mhz, STP16CPC05 c = 10 f + figure 18. turn on output current setup
docid15352 rev 4 19/30 STP16CPC05 test circuit 30 figure 19. turn off output current setup
package mechanical data STP16CPC05 20/30 docid15352 rev 4 8 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack? specifications, grade definitions and product status are available at: www.st.com. ecopack ? is an st trademark.
docid15352 rev 4 21/30 STP16CPC05 package mechanical data 30 figure 20. qsop-24 package dimensions
package mechanical data STP16CPC05 22/30 docid15352 rev 4 table 11. qsop-24 mechanical data dim. mm. min typ max a 1.54 1.62 1.73 a1 0.1 0.15 0.25 a2 1.47 b 0.31 0.2 c 0.254 0.17 d 8.56 8.66 8.76 e 5.8 6 6.2 e1 3.8 3.91 4.01 e 0.635 l 0.4 0.635 0.89 h 0.25 0.33 0.41 < 8 0
docid15352 rev 4 23/30 STP16CPC05 package mechanical data 30 figure 21. tssop24 package dimensions table 12. tssop24 mechanical data dim. mm min. typ. max. a 1.1 a1 0.05 0.15 a2 0.9 b 0.19 0.30 c 0.09 0.20 d 7.7 7.9 e 4.3 4.5 e 0.65 bsc h 6.25 6.5 k 0 8 l 0.50 0.70
package mechanical data STP16CPC05 24/30 docid15352 rev 4 figure 22. so-24 package dimensions table 13. so-24 mechanical data dim. mm. min typ max a 2.65 a1 0.1 0.2 a2 2.45 b 0.35 0.49 b1 0.23 0.32 c 0.5 c1 45(typ.) d 15.20 15.60 e 10.00 10.65 e 1.27 e3 13.97 f 7.40 7.60 l 0.50 1.27 s (max.) 8
docid15352 rev 4 25/30 STP16CPC05 package mechanical data 30 figure 23. tssop24 exposed pad dimensions 7100778_d
package mechanical data STP16CPC05 26/30 docid15352 rev 4 table 14. tssop24 exposed pad mechanical data dim. mm min. typ. max. a 1.20 a1 0.15 a2 0.80 1.00 1.05 b0.19 0.30 c0.09 0.20 d 7.70 7.80 7.90 d1 4.80 5.00 5.2 e 6.20 6.40 6.60 e1 4.30 4.40 4.50 e2 3.00 3.20 3.40 e0.65 l 0.45 0.60 0.75 l1 1.00 k0 8 aaa 0.10
docid15352 rev 4 27/30 STP16CPC05 packaging mechanical data 30 9 packaging mechanical data figure 24. tssop24, tssop24 exposed pad and so-24 reel dimensions
packaging mechanical data STP16CPC05 28/30 docid15352 rev 4 table 15. tssop24 and tssop24 exposed pad tape and reel mechanical data dim. mm min. typ. max. a - 330 c 12.8 - 13.2 d 20.2 - n 60 - t - 22.4 ao 6.8 - 7 bo 8.2 - 8.4 ko 1.7 - 1.9 po 3.9 - 4.1 p 11.9 - 12.1 table 16. so-24 tape and reel mechanical data dim. mm. min typ max a - 330 c 12.8 - 13.2 d 20.2 - n 60 - t - 30.4 ao 10.8 - 11.0 bo 15.7 - 15.9 ko 2.9 - 3.1 po 3.9 - 4.1 p 11.9 - 12.1
docid15352 rev 4 29/30 STP16CPC05 revision history 30 10 revision history table 17. document revision history date revision changes 30-jan-2009 1 first release 12-may-2009 2 updated table 6 on page 6 29-oct-2009 3 updated note: on page 3 16-jun-2014 4 updated section 8: package mechanical data . added section 9: packaging mechanical data . minor text changes.
STP16CPC05 30/30 docid15352 rev 4 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2014 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of STP16CPC05

	To Download STP16CPC05 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .